Bicycle Mechanic

1 ) Wear gloves and arm sleeves.
2 ) Hold the marked parts of the bicycle and check for any issues.
3 ) Identify the faulty part and press "Inspection Complete."
4 ) Release the seat clamp, remove the seat, replace it, and lock the clamp.
5 ) Turn the bicycle upside down, loosen the two front-wheel bolts with a wrench, remove the wheel, and place it on the table.
6 ) Remove the tube and place it on the tube holder.
7 ) Rotate the tube to find the puncture, apply adhesive, and attach a patch.
8 ) Put the tube back into the wheel.
9 ) Remove the valve cap, inflate the tire using a pump, and reattach the cap.
10 ) Reinstall the wheel on the bicycle, tighten the bolts with a wrench, then turn the bicycle upright again.